Controls WIZARD 2 50-C13A0X, Инструкция по эксплуатации

Страница: 15 / 120

Manuale di Istruzioni
Instruction Manual
Rev.1 EN 23/08/2018
13
1.5 Safety information
WARNING:
Please read this chapter thoroughly.
CONTROLS designs and builds its devices complying with the related safety
requirements; furthermore it supplies all information necessary for correct use and the
warnings related to use of the equipment.
CONTROLS will not to be held responsible for:
•
use of the equipment different than the intended use;
•
damages to the unit, to the operator, caused both by installation and maintenance
procedures different than those described in this manual supplied with the unit, and
by wrong operations;
•
mechanical and/or electrical modifications performed during and after the
installation, different than those described in this manual.
The unit is not designed to be used in an explosive atmosphere.
Installation and any technical intervention must only be performed by qualified
technicians authorized by CONTROLS.
Only authorised personnel can remove the covers and/or have access to the components
under voltage.
During normal use, if the operator detects irregularities or damages, he/she should
immediately inform the authorized technical personnel.
Maintenance and service activities can only be performed by skilled authorized technical
personnel that have been properly trained on the residual risks of the equipment.
It is responsibility of the purchaser to make sure that the operators have been properly
instructed concerning the safety issues and the residual risks related to the equipment.