Controlli W500H, Руководство пользователя

Страница: 34 / 42

Rev. d 01/1 34 DMP052E
Analogue contr.
PA2
Default Range Description Availability
Op 3 1 to 4 Operating modes (1, 2, 3, 4) Always
Abo OFF Automatic/Manual enable (Clock)
Always
Int OFF Integral action enable
Always
coP OFF Compensated set enable With SC sensor
AE1 OFF Loop stop on DI1 (External enable 1) Always
AE2 OFF Loop stop on DI2 (External enable 2)
1, 2 and 4 operating modes. 3 Mode: S/W (off)
Changeover
On/Off contr.
Pd1
Default Range Description Availability
Op 1 1 to 4 Operating mode (1, 2, 3, 4) Always
Abo OFF Automatic/Manual enable (Clock) Always
coP OFF Compensated Set enable With SC, 1, 2 operating modes
AE1 OFF Loop stop on DI1 (External enable 1) Always
AE2 OFF Loop stop on DI2 (External enable 2)
1, 2 and 4 operating mode.
In Mode3: S(on)/W (off) Changeover
SEo OFF Other ON/OFF control enable
4 Operating mode
rS OFF Switch off delay enable
4 Operating mode
rA OFF Switch on delay enable
4 Operating mode
Special Functions
Sensor selection
(SEL)
Default Range Description Availability
SSt 1 Temperature control sensor selection
Always
SSc 1 Compensation sensor selection
Always
SSH 1 Humidity control sensor selection
Always
SSE 1 Selection for sensor outside the device
Always
USE OFF Compensation sensor enable by ModBus
Always
Cth Ct Ct Ch Compensation sensor selection
Always
Communication
(buS)
Default Range Description Availability
ndL 1 1 to 4 Number of devices on LinkBus (1 - 4)
Always
idL 1 1 to 4 LinkBus position (1 - ndL)
Always
ibS 1 1 to 255 ModBus Supervisor bus address
Always
Output override
Fou
Description
A01 Auto, ON, OFF output override
A02
Auto, ON, OFF output override
D01
Auto, ON, OFF output override
D02
Auto, ON, OFF output override