Controlli W500H, Руководство пользователя

Страница: 28 / 42

Rev. d 01/1 28 DMP052E
Setting - Relay Digital output 1 Loop
P d 1
Push Set key for at least 10 seconds to enter level 2, push Up key and select
P d 1
menu.
Push Set key to select the parameter to be modified. The parameter value blinks showing the edit
status: push the Up and Down keys to change values. Once the desired values are modified, push
the Set or Esc keys to exit.
Setting - Relay digital output 2
P d 2
– 1, 2 and 3 operating mode
Push Set key for at least 10 seconds to enter level 2, push Up key and select
P d 2
menu .
Push Set key to select the parameter to be modified. The parameter value blinks showing the edit
status: push the Up and Down keys to change values. Once the desired values are modified, push
the Set or Esc keys to exit.
Visible only with 1 and 4 operating modes
Operating mode selection
Enable from time schedule (if present) or permanent enable
o P
A b o
Compensated or remote Set-point enable
Minimum limit enable
Max limit enable
c o P
L L H
L H H
Loop enable from D.i.1 switch
Loop enable from D.i.2 switch
A E 1
A E 2
Visible only with 2 and 4 operating mode
Visible only with 1, 2 and 4 operating mode
Visible only with 1 and 2 operating mode
Operating mode selection
Enable from time schedule (if present) or permanent enable
o P
A b o
Loop enable from D.i.1 switch
Loop enable from D.i.2 switch
A E 1
A E 2