Controlli W500H, Руководство пользователя

Страница: 29 / 42

Rev. d 01/1 29 DMP052E
Setting - Relay digital output
P d 1
and
P d 2
– 4 operating mode
Push Set key for at least 10 seconds to enter level 2, push Up key and select
P d 1
and
P d 2
menu .
Push Set key to select the parameter to be modified. The parameter value blinks showing the edit
status: push the Up and Down keys to change values. Once the desired values are modified, push
the Set or Esc keys to exit.
Operating mode selection
Enable from time schedule (if present) or permanent enable
o P
A b o
Relay enable by other relay contact
Enable switch-off delay of relay
Enable switch-on delay of relay
S E o
r S
r A
Relay enable from D.i.1 outside switch
Relay enable from D.i.2 outside switch
A E 1
A E 2