1
st
Issue 09/05 9
DMP026E
DG500 Terminal Connections
I/O Wiring
I/O connections include 10 configurable universal inputs (UIs), 2 digital inputs (DI), 6 digital
outputs (Line relay), and 4 analogue outputs (AO). The DOs are line relays for switching up
to 230Vac, 5A loads. Four analogue outputs provide 0 to 10V.
WARNINGS – ELECTRICAL SHOCK HAZARD!
DISCONNECT POWER FROM BOTH THE CONTROLLER AND DIGITAL
OUTPUTS BEFORE MAKING TERMINATIONS OR CHANGING
CONFIGURATION INPUT JUMPERS.
Voltage input
Note: An externally powered 0 to 10Vdc sensor (transmitter) is required. The input
impedance of a DG500 voltage input is 150 K
Ω
1. Review Precautions section.
2. Connect positive signal wire from 0 to 10Vdc device to desired input terminal.
3. Connect negative signal wire to one common (0V) terminal
4.
Ma
ke certain input configuration jumper is in Voltage position (Link C).
Содержание DG501C
Страница 32: ...1st Issue 09 05 32 DMP026E...
Страница 33: ...1st Issue 09 05 33 DMP026E...