A: Safety Instructions
7-1
7. Appendix A: Important Safety Instructions
Read all of these instructions and save instructions for later use.
Follow all warnings and instructions marked on the scanner.
A.
Do not place the scanner on an unstable surface, stand, cart or
table. Serious damage can be caused if the unit falls.
B.
Turn off all power to the unit before cleaning. Do not use liquid
cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
C.
The scanner should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of power
available, consult your dealer or local power company.
D.
The scanner is equipped with a three-wire grounding type plug.
This plug will fit only into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet.
contact your electrician to replace your obsolete outlet. Do not defeat
or ignore the purpose of the grounding-type plug.
E.
Do not allow anything to rest on the power cord. Do not locate the
scanner where persons will walk on the cord.
F.
If an extension cord is used with the scanner, make sure that the
total of the ampere ratings of the products plugged into the extension
cord does not exceed the extension card ampere rating. Also, make
sure that the total of all products plugged into the wall outlet does not
exceed 15 amperes.
G.
Slots or openings in the cabinet at the back or bottom are provided
for ventilation. This ensures reliable operation of the product and
protects it from overheating. These openings must never be blocked
or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar soft surface. This product should
never be placed near or over a radiator or heat register. This product
should not be placed in a built-in installation unless proper ventilation
is provided.
H.
Never push objects of any kind into the scanner through cabinet
slots since they may touch dangerous voltage points or short out parts
