Table of Contents
1.
About This Guide
1-1
2.
Scanner System Requirements
2-1
3.
Installation 3-1
3.1
Set up the scan station
3-1
3.2
Smart Card
3-1
3.3
Install Drivers and Maintenance software
3-1
3.4
Select the Scanner Interface
3-2
3.4.1
Interface Types
3-2
3.4.2
Cable Connector Panel on the Scanner
3-3
3.5
Connection through the FireWire interface
3-6
3.5.1
Check your computer for FireWire
3-6
3.5.2
Connect the scanner with the Firewire cable
3-6
3.5.3
“Unknown device is found” message
3-7
3.6
Connection through the USB interface
3-7
3.6.1
Check your USB Port
3-7
3.6.2
Connect the scanner with the USB cable
3-8
3.6.3
“Unknown device is found” message
3-8
3.7
Connection through the SCSI interface
3-9
3.7.1
Step 1: Install the SCSI host adapter board
3-9
3.7.2
Step 2: Install the SCSI driver software
3-10
3.7.3
Step 3: Connect the scanner to the PC
3-10
3.7.4
Step 4: Set the scanner DIL-switches
3-10
3.8
Installation Verification
3-15
3.9
Preliminary Maintenance
3-15
4.
Operator Panel and Indicators
4-1
4.1
Scanner Control area
4-3
4.2
Application Control Area
4-5
4.3
Paper Control area
4-6
5.
Original’s Insertion Slot
5-1
5.1
Rulers 5-1
5.2
Scanning Thick Media
5-2
5.2.1
Manual Adjustment for thick media
5-2
5.2.2
Automatic Thickness Adjustment Control
5-3
5.2.3
When Scanning in Extended Media Positions
5-4
5.3
Accessing the scan area
5-5
5.3.1
Detach the pressure platen – non ATAC models
5-5
5.3.2
Flip Open the Pressure Platen – ATAC models
5-6
5.4
Changing the glass plate
5-6
6.
Maintenance 6-1
