Contec ADA16-32/2(PCI)F Скачать руководство пользователя страница 73

Страница: 73 / 109

4. Functions

ADA16-32/2(PCI)F

- Software

Sampling continues indefinitely in this mode. Sampling only stops in response to a software

command or an error.

Event controller output

Sampling stops when the specified event controller output is received.

Refer to the explanation of the event controller functions or to the driver help for details about the

event controller.

Event

”Event” works as a function for reporting the occurrence of a certain board state to the application.

The following events can be used in combination depending on the specifications and purpose of the

application.

”DA conversion start condition satisfied” event

This event occurs when the DA conversion start condition is satisfied. The event is nullified when

the conversion start condition is “software”.

”Repeat end” event

This even occurs whenever a repetition is completed.

”End of device operation” event

This event occurs when the entire operation including repetitions is completed.

"Specified number of output samples complete" event

This event occurs when the number of output samples specified by software have been completed.

This event is used when the device buffer mode is used for data transfer.

Specified number of transfers event

This event occurs each time a specified number of samples (set by software) has been completed.

When FIFO format is used, the event occurs when the remaining number of samples falls below a

specified level. The event occurs repeatedly as long as this condition is satisfied.

When ring memory format is used, the event occurs when the number of samples output from

memory reaches a specified value. The event occurs for the specified number of repetitions.

This event is used when the user buffer mode is used for data transfer.

Sampling clock error event

This event occurs when conversion stops as an error occurs due to a sampling clock period that is

too short.

DA conversion error event

This event occurs when conversion stops due to an DA conversion error.

2. Starting/Stopping Operation

Analog output operation is started by a software command (the analog output start command).

Similarly, you can stop analog output at any time using a software command (the analog output stop

command).

Содержание ADA16-32/2(PCI)F














































































































Результаты поиска

Содержание ADA16-32/2(PCI)F

Отзывы:

Похожие инструкции для ADA16-32/2(PCI)F

Бренды по названию

Популярные бренды

Contec ADA16-32/2(PCI)F, Руководство пользователя

Результаты поиска

Содержание ADA16-32/2(PCI)F

Отзывы:

Похожие инструкции для ADA16-32/2(PCI)F

Бренды по названию

Популярные бренды