Contec ADA16-32/2(PCI)F, Руководство пользователя

Страница: 102 / 109

6. About Hardware
ADA16-32/2(PCI)F
95
Table 6.1. Specification (2/2)
Item Specification
Counter
Number of channels 2ch
Counting system Up count
Max. count FFFFFFFFh (Binary data,32bit)
Number of external
inputs 2 TTL (Gate/Up)/ch
Gate (High level), Up (Rising edge)
Number of external
outputs TTL 1 output/ch
Count match output (positive logic, pulse output)
Bus master section
DMA channels 2ch (one each for input and output)
Transfer bus width 32bit
Transfer data length 8 PCI Words length (Max.)
FIFO 1K-Word/ch
Scatter/Gather function 64M-Byte/ch
Synchronization bus section
Control output signal
Selection of output signal with the software when specifying a sync
master board.
Control input signal
Selection of sync factor with the software when specifying sync slave
boards.
Max. board count for
connection
16 boards including the master board
Connector PS-10PE-D4T1-B1 (JAE) or equivalent x 2
Common section
I/O address 64 ports x 1,256 ports x 1 region
Interruption level Errors and various factors, One interrupt request line as INTA
Connector
96-pin half pitch connector [M(male)type]
PCR-96LMD [HONDA TSUSHIN KOGYO CO., LTD.] or equivalent
Power consumption 5VDC 1100mA (Max.)
Operating condition 0 - 50 ° C, 10 - 90%RH (No condensation)
PCI bus specification 32bit, 33MHz, Universal key shapes supported *2
Dimension (mm) 176.41(L) x 105.68(H)
Weight 130g
*1: The non-linearity error means an error of approximately 0.1% occurs over the maximum range at 0 ° C and 50 ° C
ambient temperature.
*2: This board re5V power supply from expansion slots (it does not operate in the environment of only +3.3V
power supply).
Board Dimensions
[mm]
The standard outside dimension (L) is
the distance from the end of the board
to the outer surface of the slot cover.
176.41(L)
10
6.6
8(H
)