background image

Copyright 

© 

2013 

congatec 

AG 

        QMX6m03 

        

52/63

9.9 

DisplayPort

Table 14  DisplayPort Signal Descriptions

Signal

Pin # Description

I/O

PU/PD Comment

D

DP_LANE3-

131

133

DisplayPort differential pair lines lane 3 (Shared with 

T and TMDS_CLK-)

O PCIE

DisplayPort interface not supported

D

DP_LANE2-

143

145

DisplayPort differential pair lines lane 2 (Shared with 

TMD and TMDS_LANE0-)

O PCIE

DisplayPort interface not supported

D

DP_LANE1-

137

139

DisplayPort differential pair lines lane 1 (Shared with 

TMD and TMDS_LANE1-)

O PCIE

DisplayPort interface not supported

D

DP_LANE0-

149

151

DisplayPort differential pair lines lane 0 (Shared with 

TMD and TMDS_LANE2-)

O PCIE

DisplayPort interface not supported

DP_AUX-

138

140

Auxiliary channel used for link management and 

device control. Differential pair lines.

I/O PCIE

DisplayPort interface not supported

DP_HDMI_

HPD#

154

Hot plug detection signal that serves as an interrupt 

request.

I 3.3V

DisplayPort interface not supported

 

Note

The conga-QMX6 does not offer DisplayPort interface because the interface is not supported by the Freescale

®

 i.MX6 processor.

9.10 

HDMI

Table 15  HDMI Signal Descriptions

Signal

Pin # Description

I/O

PU/PD

Comment

T

TMDS_CLK-

131

133

TMDS differential pair clock lines.

O TMDS

HDMI interface

TMD

TMDS_LANE0-

143

145

TMDS differential pair lines lane 0.

O TMDS

HDMI interface

TMD

TMDS_LANE1-

137

139

TMDS differential pair lines lane 1.

O TMDS

HDMI interface

TMD

TMDS_LANE2-

149

151

TMDS differential pair lines lane 2.

O TMDS

HDMI interface

HDMI_CTRL_CLK

152

DDC based control signal (clock) for HDMI device. 

I/O 3.3V OD PU 4k7 3.3V  HDMI interface. 

HDMI_CTRL_DAT

150

DDC based control signal (data) for HDMI device.

I/O 3.3V OD PU 4k7 3.3V HDMI interface. .

DP_HDMI_HPD#

153

Hot plug detection signal that serves as an interrupt request. I 3.3V

PD 100k

HDMI interface

 

Note

On the conga-QMX6, only the HDMI interface supports the Transition Minimized Differential Signaling (TMDS)

 

Содержание Qseven conga-QMX6

































































Отзывы: