Congatec Qseven conga-QMX6 Скачать руководство пользователя страница 21

Страница: 21 / 64

2013

congatec

QMX6m03

21/63

2.7

Environmental Specifications

Temperature

Operation: 0° to 60°C

Storage: -20° to +80°C

(commercial grade variants of conga-QMX6)

Temperature

Operation: -40° to 85°C

Storage: -40° to +85°C

(industrial grade variants of conga-QMX6)

Humidity

Operation: 10% to 90%

Storage: 5% to 95%

(humidity specifications are for non-condensing conditions)

Caution

The above operating temperatures must be strictly adhered to at all times. The congatec heatspreader is only suitable for use within commercial

temperature ranges

(0° to 60°C)

, it is not designed to be used within industrial temperature ranges

(-40° to 85°C).

When using a heatspreader

with conga-QMX6 commercial grade variants, the maximum operating temperature refers to any measurable spot on the heatspreader’s

surface.

congatec AG strongly recommends that you use the appropriate congatec module heatspreader as a thermal interface between the module

and your application specific cooling solution when used in a commercial temperature range.

If it is not possible to use the appropriate congatec module heatspreader for conga-QMX6 commercial grade variants, or an industrial grade

variant of conga-QMX6 is being used within industrial temperature ranges, then it is the responsibility of the operator to ensure that all

components found on the module operate within the component manufacturer’s specified temperature range.

Содержание Qseven conga-QMX6

































































Результаты поиска

Содержание Qseven conga-QMX6

Отзывы:

Похожие инструкции для Qseven conga-QMX6

Бренды по названию

Популярные бренды

Congatec Qseven conga-QMX6, Руководство пользователя

Результаты поиска

Содержание Qseven conga-QMX6

Отзывы:

Похожие инструкции для Qseven conga-QMX6

Бренды по названию

Популярные бренды