Copyright
©
2013
congatec
AG
QMX6m03
13/63
2
Specifications
2.1
Feature List
Table 3 Feature Summary
Form Factor
Based on Qseven
®
form factor specification revision 2.0
Processor
Freescale
®
i.MX6 Cortex A9
Memory
up to 2 GB onboard DDR3 memory
Audio
I2S format supported
Ethernet
Gigabit Ethernet (Qualcomm Atheros PHY) on conga-QMX6 rev B.x. Earlier conga-QMX6 variants are equipped with Micrel KSZ9031 PHY.
Graphics Options
Integrated video graphic subsystem consisting of Video Processing Unit (VPU), Graphic Processing Unit (3D GPU, 2D GPU, Open VG), Image
Processing Unit, Display interface bridges (LVDS, HDMI, MIPI/DSI).
• 1x HDMI 1.4.
• Two LVDS channels driven by the LVDS display bridge. Support:
• Single channel LVDS interface : 1 x 18 bpp or 1 x 24 bpp (up to 85 MHz per
interface e.g 1366x768 @ 60Hz + 35% blanking)
• Dual channel LVDS interface: 2 x 18 bpp OR 2 x 24 bpp (up to 170 MHz pixel
clock e.g 1600x1200 @ 60 Hz + 35% blanking).
NOTE:
Supports three independent displays (must be 2x single channel LVDS and 1x HDMI)
• Video Decode Acceleration:
MPEG2 MP, HP
MPEG4 SP
H.264
VC-1
DivX
Peripheral
Interfaces
• 1x Serial ATA
®
Gen 2 (3GB/s)
• 1x SDIO
• x1 PCI Express Lane Gen 2.0 offering up to 5 GB/s
• 5x USB 2.0 ports (4x USB 2.0 hosts and 1x USB 2.0 OTG)
• I2S Bus
• SPI
• CAN
• 8x GPIOs
• 3x I²C fast mode, multi-master (two shared I²C buses and
one unshared bus)
• 1x UART (fully featured UART with control signals,
supported on the MXM connector)
• 2x RS-232 interfaces supported onboard the conga-QMX6
via RS232 transceiver.
Onboard Interfaces
and Devices
• Android Buttons
• JTAG
• RS-232 Debug Port
• SPI Flash (contains the bootloader)
• DDR3 SDRAM memory (up to 2 GB)
• Micro-SD Socket
• eMMC module (4GB onboard)
Bootloader
Pre-installed open-source bootloader (U-boot)
Power Management
Yes.
Note
Some of the features mentioned in the above feature summary are optional. Check the article number of your module and compare it to the
conga-QMX6 options information list on page 12 of this user’s guide to determine what options are available on your particular module.