Conel CLEAR 2.0 SAFE, Руководство по эксплуатации

Страница: 34 / 76

34
The mains voltage must not be interrupted (e.g. via a light switch).
If the control sensor does not have a permanent power connection,
/ a possible leak may not be identified,
/ the control sensor cannot close in the event of a leak.
5.4
INSTALLATION DIMENSIONS
The control sensor can be installed in horizontal or vertical pipes.
Fig. 3: Installation dimensions
Installation dimensions for
combination
of the control sensor
with the following filters CLEAR 2.0 K
CLEAR 2.0 KD
¾" - 1" CLEAR 2.0 K
CLEAR 2.0 KD
1¼" CLEAR 2.0 R
CLEAR 2.0 RD
¾" - 1" CLEAR 2.0 R
CLEAR 2.0 RD
1¼"
B: Device width 173 173 173 173
E: Depth to pipe middle 257 262 257 262
F: Waste water connector middle
to pipe middle
-- -- 197 202
All dimensions in [mm]