Conductix-Wampfler BridgeGuard Plus, Руководство по сборке, установке, эксплуатации и обслуживанию

Страница: 12 / 20

BRIDGEGUARD PLUS
TM
MANUAL
12
SECTION 4 - INSTALLATION
4.0. Reflector Mounting
NOTE:
• Reflector plate come with 6 pre-drilled holes for mounting See
Figure 4-1
• A minimum of 4 fasteners should be used to mount reflector to I-Beam web
4.0.1 Mount reflector to the I-Beam using appropriate hardware. See Figure 4-1
NOTE:
• A spacer must be used between the I-Beam’s web and the reflector back plates.
• A lock washer much be used to prevent loosening.
• The plate can be mounted to other surfaces using the same holes, the beam is only an example.
Figure 4-1
Reflector
5.00
(127)
5.00
(127)
5.00
(127)
6x
[
.27
13.00 (330)
Reflector
I-Beam for
Reference