Condre A/V RAID Скачать руководство пользователя страница 59

Страница: 59 / 70

connected.

All modem
operations are
canceled!

User stopped the modem from sending a page or FAX
notification.

Training FAIL!

Fax Class 1 support -- modem fails in training phase.

Page transfers
FAIL!

The page notification failed. Modem may be turned off
or not connected.

FAX: Modem is
busy!

The modem is currently is use and unable to send a FAX
notification.

Paging: Modem
is busy!

The modem is currently is use and unable to send a page
notification.

Invalid NVRAM

The information stored in the NVRAM area is invalid and
unable to be used.

No Configuration The ProRAID is currently not configured for any RAID

level.

Config ERROR

The current configuration failed to be verified. Possible
fault disk or disk off-line.

Not enough Disk Number of disks required for the RAID Level is missing.

Possible faulty disks or disks off-line.

Fail Fan

The cooling fan of chassis is failed.

WARM Temp

The inside temperature of chassis is too high.

Fail Power

The redundant have occurred error.

Содержание A/V RAID







































































Результаты поиска

Содержание A/V RAID

Отзывы:

Похожие инструкции для A/V RAID

Бренды по названию

Популярные бренды

Condre A/V RAID, Руководство пользователя

Результаты поиска

Содержание A/V RAID

Отзывы:

Похожие инструкции для A/V RAID

Бренды по названию

Популярные бренды