21. Press the down arrow [
▼
] button until the “51 Update NVRAM” menu is displayed
then to press the [ENT] button.
22. Use the down arrow [
▼
] button until the “Yes” option is displayed then to press the
[ENT] button.
23. Use the down arrow [
▼
] button until the “53 Restart” menu is displayed then press
the [ENT] button.
24. Use the down arrow [
▼
] button until the “Yes” option is displayed then press the
[ENT] button.
NOTE
: This will automatically restart the
Condre RAID
.
4.1.3 Single Host Configuration for Logical Units
The
Condre
RAID controller can support up to 8 logical units. A RAID array may
be divided into multiple logical units. A logical unit is that portion of a disk array seen
by the host system as a single logical device. Each logical unit is identified to the host
by its
L
ogical
U
nit
N
umber.
1.
Please finish section Single host configuration steps first.
2.
Press the [ENT] button to open the “6 RAID Funcs” menu.
3.
Press the down arrow [
▼
] button until the “62 Init R5/R3” menu is displayed then press
[ENT] button.
4.
Use the down arrow [
▼
] button until the ”STOP” option is displayed then press the
[ENT] button.
5.
Press the [ESC] button to return to the “Main Menu” menu.
6.
Press the [ENT] button to open the “1 RAID Parmas” menu.
7.
Press the down arrow [
▼
] button until the “14 Slice” menu is displayed then press the
[ENT] button.
NOTE
: The Slice will allow you to divide the partition size of
Condre RAID
.
8.
Press the down arrow [
▼
] button until the “141 Slice0(MB)” menu is displayed then
press [ENT].
9.
Key-in the capacity you want in Slice 0 then press [ENT] button.
10.
Press the down-arrow [
▼
] button to select from “142 Slice 1(MB)” to “148
Slice7(MB)” follow steps 8 and 9
11.
Press the [ESC] button to return to the “Main Menu” menu.
12.
Press the down arrow [
▼
] button until the “2 SCSI Params” menu is displayed then
press the [ENT] button.
13.
Press the down arrow [
▼
] button until the “216 LUN map” menu is displayed then
press the [ENT] button.
14.
Press the down arrow [
▼
] button until the “2161 LUN 0” menu is displayed then
press the [ENT] button.
23
15.
Follow the next table to setup “LUN” menu.
