Condair RH 1.8, Инструкция по установке и эксплуатации, Страница: 52 / 68

52 Maintenance
7.4.2.2 Removal and installation of the drain valve
To remove the drain valve, the steam cylinder (see Section 7.4.1.1 ) and the cover of the internal water
system (see
Section 7.4.2.1
) must be removed.
1. Disconnect the plug connection of the connection cable on the drain valve.
2. Disconnect the hose from the connector on the drain valve.
1
2
Fig. 10: Unplug the connection cable and pull off the hose
3. Push the tab that secures the left side of the drain valve into the drain pan to the left and lift the drain
valve.
4. Pull the drain valve upwards at an angle from the holder in the drain pan.
3
4
Fig. 11: Removal of the drain valve