55
APPENDIX C: CONNECTING EXTERNAL DEVICES
ARI PANIC GND
PAnIc
connect an external push button switch to the ‘Panic’ and
‘GnD’ terminals. Pushing the switch will activate the panic
recording function.
TelemeTRy, VA- AnD PoS
connect RS485+ to the ‘+’ or ‘A’ terminal of any attached
telemetry devices or VA- keyboard. connect
RS485- to the ‘-’ or ‘b’ terminals, on the lefthand side RS485
connection on.
PoS: connect your till system to the righthand side RS485
connection
ARI PANIC GND
AlARm ReSeT
connect an external push button switch to the ‘ARI’ and ‘GnD’
terminals. Pushing the switch will reset all system alarms.
A11
A14 GND
A15 A16 A17 A18 GND A19 A20 A21 A22 GND A113 A114 A115 A116 GND
ALARM IN
A12 A13
AlARm InPUTS
connect voltage free contacts from PIRs and beam break
detectors etc. to the ‘GnD’ terminal and ‘AIXX’ terminals of
choice.
AlARm oUTPUTS
connect the ‘GnD’ terminal and ‘AoXX’ terminal of choice to
standard alarm inputs on other equipment, e.g. phone diallers
and alarm panels etc.
RelAy oUTPUT
connect the ‘com’ and ‘no’ or ‘nc’ terminal of choice to
activate low voltage sounders, strobes etc.
NO COM NC NO COM NC NO COM NC
NO COM NC
