22
CONFIGURING THE VXH264D
DISPLAY
DISPlAy: SeQUence
when the
SEQ
button is pressed, the default sequence will cycle through all 16 channels,
one by one.
Sequence setup allows the operator to define a custom sequence using mixed multi screen
views and any desired channels.
To add a new sequence, highlight ADD and press
ENTER
.
Sequence title is highlighted – press
ENTER
to bring up the virtual keyboard and key in a
name or reference number for the new sequence.
move around the virtual keyboard using the
CURSOR KEYS
and
ENTER
to select a
character.
To delete a character, use
Á
.
To change keyboard case and use the A/a located on the bottom right of the virtual keyboard.
To exit, press
RETURN
.
Press ADD to show the SeQUence SeT-UP SySTem screen. This represents the first
sequence screen that will be displayed. Select the VIew TyPe (Single or various multi-
view) and press
ENTER.
Set ScHeDUle to on, highlight SAVe and press
ENTER
to display the sequence
programming screen.
when the correct screen type is displayed use the
CURSOR KEYS
to configure the channels
required for each portion of the multi-screen.
note: only one instance of each channel can be displayed.
