106 - Managing the DeviceMaster
DeviceMaster Installation and Configuration Guide
: 2000594 Rev. F
Managing the DeviceMaster
7.
Enter the IP Address for the DeviceMaster. It is not necessary to enter the Subnet Mask and Default
Gateway.
8.
Click
Ok
to close the
Add New Device
window. It may take a few moments to save the DeviceMaster.
9.
If necessary, click
Refresh
for the new DeviceMaster to display in the
Device Tree
or
Device List
panes. The
DeviceMaster shows OFF-LINE if it is not attached to the network or if an incorrect IP address was
entered.
Local Using the IP Address or MAC Address
Use the following procedure to add a local DeviceMaster to PortVision DX if you do not want to scan the
network.
1.
Locate the network information or MAC address of the DeviceMaster you want to add.
2.
Access the
New Device
window using one of these methods:
•
Click
Add New > Device
in the
Manage
menu.
•
Right-click a folder or a RocketLinx switch in the
Device Tree
pane (anywhere in the pane, as long as a
DeviceMaster is not highlighted and you are in a valid folder) and click
Add New > Device
.
3.
Select the appropriate DeviceMaster in the
Device Type
drop list.
4.
Select the appropriate model in the
Device Model
drop list.
5.
Enter a friendly device name in the
Device Name
list box.
6.
Select
LOCAL
for the
Detection Type
.
Содержание DeviceMaster PRO
Страница 1: ...Installation and Configuration Guide ...
Страница 32: ...32 Hardware Installation DeviceMaster Installation and Configuration Guide 2000594 Rev F Hardware Installation ...
Страница 130: ...130 Managing the DeviceMaster DeviceMaster Installation and Configuration Guide 2000594 Rev F Managing the DeviceMaster ...