Comtech EF Data Vipersat SLM-5650A, Инструкция по установке и эксплуатации

Страница: 399 / 516

SLM-5650A Satellite Modem
Revision 10
Appendix E E–77 MN-SLM-5650A
E.8.2.2.4 Administration Menu | SNMP (P)
The SNMP page, opened from the Administration Menu, allows the user to change the parameters
associated with Simple Network Management Protocol , an application-layer protocol designed to
facilitate the exchange of management information between network devices.
The SLM-5650A SNMP agent supports SNMPv1, v2c and, when the IP Interface Security Level has
been set to High, SNMPv3. The page contains the following options or fields:
Menu Options/Fields Entry Description
Read Community [RO]
For complete details on SNMP and using this menu, see Chapter 8.2 SNMP
Interface.
Write Community [RO]
Trap Community T
Trap I
System Contact C
System Location N
Once all changes have been made using this menu, in order for the configuration to take effect, the
user must press ‘S’ to save these SNMP configuration changes, then reboot the modem using the
Reboot Now prompt (press ‘R’ using the
Administration Menu ) as outlined in this appendix in
Section E.3.2.2.8 .
E.8.2.2.5 Administration Menu | Restore Factory Defaults (D)
Select ‘D’ from the Administration Menu to restore all previously-configured modem parameters to
their Factory Default Configuration settings. You are prompted:
Are you sure you wish to continue? (Y or N)
Press ‘Y’ to begin the restoration process, or ‘N’ to abort the command and return to the previous
menu.
Using ‘Restore Factory Defaults’ does not change the user name and password
settings.