Comtech EF Data Vipersat SLM-5650A, Инструкция по установке и эксплуатации

Страница: 241 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–47 MN-SLM-5650A
10.3.6 Bulk Configuration Commands and Queries
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Configuration
Load
CLD= N/A 1 byte Command only.
Causes the modem to retrieve a previously stored configuration from
Configuration Memory location defined by the one-byte argument (0
to 9).
COMMAND EXAMPLE: <0001/CLD=4{CR} (retrieve modem
configuration from location 4)
CLD=
CLD?
CLD*
CLD#
N/A
Configuration
Save
CST= N/A 1 byte Command only.
Command causes the modem to store the current configuration in
Configuration Memory location defined by the one-byte argument (0
to 9).
COMMAND EXAMPLE: <0001/CST=4{CR} (store the current
configuration in location 4)
CST=
CST?
CST*
CST#
N/A
Global
Configuration
MGC= MGC? Command can
be 177 bytes
or 217 bytes;
Query
Response is
always 217
bytes
Command or Query.
Global Configuration of SLM-5650A, in the form:
abcdeeeeeefghijabbbbbbklmnoooooo.ooopppp.ppppqcrestuvwxyyy.y
zABCDEFGHHff.fffIJKLLLLLL.LLLMMMM.MMMMNgggPQRSTUVWX
YZZZZ.ZZZAAABCDDDDDDDDEE.EFGHIJKLMNNN.NOOO.OPPP.
PQQ.QR.RSTUVWXXYZZhhhijjjkkkkkmmmmmlllllllllllllllllllllll where:
a = Modem Operating Mode ....................................... same as MOM
b = Modem RF Band .....................................................same as RFB
c = Modem Interface Type ............................................ same as ITF
d = Modem Reference Clock .......................................same as MRC
eeeeee = Modem Alarm Mask ..................................... same as MSK
f = Carrier Only Test Modes ....................................... same as COM
g = Loopback Test Modes .............................................same as LOP
h = Tx BERT State ......................................................... same as BTX
i = Rx BERT State ....................................................... same as BRX
j = BERT Pattern ........................................................... same as PAT
MGC=
MGC?
MGC*
MGC#
MGC=abcdeeeeeefghi
jabbbbbbklmnoooooo.
ooopppp.ppppqcrestu
vwxyyy.yzABCDEFGH
Hff.fffIJKLLLLLL.LLLM
MMM.MMMMNgggPQ
RSTUVWXYZZZZ.ZZ
ZAAABCDDDDDDDD
EE.EFGHIJKLMNNN.
NOOO.OPPP.PQQ.Q
R.RSTUVWXXYZZhh
hijjjkkkkkmmmmmllllllll
lllllllllllllll