Comtech EF Data Vipersat SLM-5650A, Инструкция по установке и эксплуатации

Страница: 204 / 516

SLM-5650A Satellite Modem
Revision 10
Serial Remote Control 10–10 MN-SLM-5650A
10.3.2 Initial Setup – Priority Commands and Queries
Before executing any Modem, Unit, Bulk/Global, AUPC, or Optional Interface commands/queries, initial setup should be accomplished
with these three commands, prioritized as follows: MOM (Highest Priority), RFB, ITF (Lowest Priority). Priority commands are indicated by
shading throughout these sections. Any change to a higher priority parameter can override any of the lower priority parameters.
Parameter
Type
Controller-to-Target
Instruction Code and
Qualifier
Arguments
for Command
or Query
Description of Arguments
(Note that all arguments are ASCII numeric codes from 48 to 57)
Target-to-Controller
Command Query
Response to
Command
Response to Query
(see Description of
Arguments)
Modem
Operating Mode
MOM= MOM? 1 hex byte Command or Query.
Sets or returns the Modem Operating Mode in the form x, where:
0 = OM-73
1 = Mil-165A
2 = IESS-308
3 = IESS-309
4 = IESS-310
5 = TURBO
6 = 16QAM
7 = AUPC
8 = RXBURST
9 = TXBURST
A = TURBO-FA
B = RXBRSTFA
C = LDPC
Example: <0001/MOM=0{CR} (sets OM-73 operating mode)
MOM=x
Modem RF
Band
RFB= RFB? 1 byte Command or Query.
Sets or returns the Modem RF Band in the form x, where:
0 = 70/140 MHz Band
1 = L-Band (950 MHz – 2000 MHz)
Example: <0001/RFB=0{CR} (sets 70/140 Band)
RFB =x