Comtech EF Data SMS-7000, Инструкция по установке и эксплуатации

Страница: 73 / 148

SMS-7000 Modem Protection Switch Operation
Rev. 3 3–3
3.2.1 LED Indicators
The eight LEDs on the front panel indicate the following (see Table 3-1):
Table 3-1. LED Indicators
Name LED Description
Status
Power On Green Indicates that power is applied to the switch.
Auto Green Indicates the switch is automatically assigning backup modems.
Manual Green Indicates the backup modems are being assigned as directed by the user
from the manual menu.
Switch Fault
System Red Indicates a communications failure or a configuration anomaly between
the switch and the attached modems. Specifics are displayed in the
Fault/Alarm menu. For example, mixing modems (without paying
attention to Table 1-1) in a rack will cause this fault, due to differences in
the remote communications commands.
Equipment Red Indicates a communications failure between the switch modules or a
detected fault within the switch hardware. Specifics are displayed in the
Fault/Alarm menu. For example, a power supply not plugged in will
indicate this fault.
Stored Yellow Indicates that a fault occurrence has been logged and stored. Specifics are
displayed in the Stored Fault/Alarms menu.
The fault may or may not be active.
Transmit Yellow Indicates a faulted prime modulator which has not been backed up. The
identity of the faulted modem(s) is displayed in the switch Fault/Alarm
menu. Specifics are displayed in the Fault/Alarm menu of the individual
modems. This fault clears when the faulted prime is backed up or when
the fault is removed.
Receive Yellow Indicates a faulted prime demodulator which has not been backed up. The
identity of the faulted modem(s) is displayed in the switch Fault/Alarm
menu. Specifics are displayed in the Fault/Alarm menu of the individual
modems. This fault clears when the faulted prime is backed up, or when
the fault is removed.