Comtech EF Data KPA-020IN, Инструкция по установке и эксплуатации

Страница: 96 / 99

i-1
INDEX
A
Access Methods, 6-5
Addresses, 6-6
B
Block Diagram of KPA-020IN, 1-2
Block Diagram of KPA-040, 1-3
Block Diagram of KPA-080/100, 1-4
C
Cable Connection, 2-2, 2-3
Cables, 6-3
Command, 6-7
Command Ending, 6-8
Configuration Errors, 6-17
Command/Response Pairs, 6-9
Configuration Commands, 6-10
Confirmation Response, 6-7
Connector Pins, 3-1
Control Cabling for a 1:1 System, 5-2
Control Cabling for a 1:2 System, 5-3
Current Faults Menu, 4--13
Customer Discrete Control, Connector J5, 3-2
D
Device Address, 6-7
Dimensional and Outline Diagram, 3-5
Dimensional Diagram KPA-080/100, 3-7
Direct Access, 6-5
E
Electrical Interface, 6-2
End of Message, 6-8
Error Processing, 6-17
Error Response, 6-7
External Connections, 3-1
F
Family of Ku-Band SSPA, 1-1
Front Panel, 4-1
Front Panel Indicators, 4-3
Functional Description, 1-3
G
Gain Eequalization of Redundant Units, 5-4
General, 4-1, 5-1, 6-1, 7-1
I
Indirect Access, 6-5
Installation, 2-1, 2-2
Interface Connector, 6-2
Introduction, 1-1
K
KPA Commands, 4-7
M
Maintenance and Troubleshooting, 7-1
Maintenance Testing, 7-2
Menu Tree, 4-6
Message Structure, 6-6
Mode Commands, 6-11
O
Operation, 4-1, 4-5
Operating Functions, 4-2
Optional: Redundancy Kit Installation, 2-3
Overview, 1-1
P
Physical Address, 6-6
Possible Time-Out Sources, 6-17
Prime Power Connection, 2-2
Prime Power Switch, 3-5
Protocol, 6-4
R
Rear Panel, 3-1
Rear Panel Connector, 3-1
Redundancy Installation, 2-4
Redundancy Kit (AS/0435), 2-5
Redundancy Kit (KPA-040), 2-5
Redundant Configuration, 5-1
Redundant Loop Interface Connector J4, 3-2
Redundant Operation, 5-1
Redundant Outline Diagram KPA-080/100, 3-9
Remote Control Specification, 6-1