Comtech EF Data CDM-800, Инструкция по установке и эксплуатации

Страница: 64 / 130

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–4
The user defines two Community Strings for SNMP access:
•
Read Community default = public
•
Write Community default = private
For proper SNMP operation, the CDM ‐ 800 MIB files must be used with the
associated version of the CDM ‐ 800 router M&C. Refer to the CDM ‐ 800 FW Release
Notes for information on the required FW/SW compatibility.
5.4 Web Server (HTTP) Interface
A user ‐ supplied Web browser allows the full monitoring and control (M&C) of the CDM ‐ 800
from its Web Server Interface. This embedded Web application is designed for, and works best
with, Microsoft Internet Explorer Version 7.0 or higher.
5.4.1 User Login
Type the CDM ‐ 800 Management IP Address (shown here as http://xxx.xxx.xxx.xxx ) into the
Address area of the user PC Web browser:
The login page opens.
Enter the assigned User Name and
Password – the default for both is
comtech . Click [Log On] .
If the User Name and Password are
accepted: The CDM ‐ 800 Gateway Router
Web Server Interface Home page, similar
to the example shown here, appears: