Comtech EF Data CDM-800, Инструкция по установке и эксплуатации

Страница: 109 / 130

6–1
Chapter 6. SERIAL-BASED REMOTE PRODUCT
MANAGEMENT
6.1 Introduction
Serial ‐ based Remote Product Management of the CDM ‐ 800 Gateway Router is available using the rear panel ‘CONSOLE’ port.
1. To proceed with Serial ‐ based Remote Product Management, assumptions are made that:
•
The CDM ‐ 800 Gateway Router is operating with the latest version firmware files.
•
The CDM ‐ 800 is connected to a user ‐ supplied Windows ‐ based PC as follows:
o
The PC serial port is connected to the CDM ‐ 800 rear panel ‘CONSOLE’ port using a user ‐ supplied serial cable.
o
The PC Ethernet port is connected to the CDM ‐ 800 rear panel ‘MANAGEMENT | FE’ 10/100 BaseT Ethernet port
with a user ‐ supplied hub, switch, or direct Ethernet cable connection.
o
The PC is running a terminal emulation program (for operation of the CDM ‐ 800 Serial Command Line Interface)
and a compatible Web browser (for operation of the CDM ‐ 800 Web Server Interface).
•
The CDM ‐ 800 Management IP Address has been noted using the CDM ‐ 800 Serial Command Line Interface (CLI).