Comrex Access NX, Руководство по эксплуатации продукта

Страница: 103 / 127

103
UDP Reliability – UDP, the Internet protocol used by BRIC Normal connections, does not have any inherent
error correction capability. UDP reliability adds an intelligent algorithm that requests packet resends only when
appropriate. UDP reliability can be useful on some wireless connections that have unsatisfactory performance due
to packet loss.
Max Retransmission Rate – Allows setting of an upper limit on how much additional bandwidth is utilized by the
BRUTE UDP reliability layer. The default setting is 100, which allows the error correction layer to use the same
amount of bandwidth as the audio stream. As an example, if you’re audio stream is consuming 80 kb/s of network
bandwidth, and UDP Max Retransmissions is set at 50%, up to 40kb/s additional network bandwidth may be used
for error correction.
AdVANCEd SyStEM SEttINgS
AuXIlIAry SErIAl
This allows you to set the parameters of the auxiliary serial data port. This port is always active during an IP
connection and allows serial data transfer along the same path used for the audio data. It does not remove any
audio data; the serial data is added to the packets and bandwidth is increased to support the additional data. For
this reason heavy use of serial data can affect overall codec performance. Settings are available for
Baud Rate, Data
Bits, Stop Bits, Flow Control and Parity . Most users will leave the defaults of 9600, 8, 1, No Flow Control and No
Parity.