97
To enable an automatic backup, both the primary and secondary remote connections must first be defined and
assigned profiles. Next, select the primary remote and select
Backup Remote.
Choose from the list the remote to
be used for the backup.
“Auto FAll-ForwArd” FuNCtIoN
Selecting the
Auto fall-forward
function allows NX to monitor the primary IP connection while the backup is active.
If the primary is restored, and is detected to be valid for the timeout period, the backup will be disconnected and
the unit will revert to the primary.
However,
Auto fall-forward
does not work when the POTS backup unit receiving the call is the same physical unit as
the one being used as the primary IP-connected unit. This is because an ACCESS unit that is receiving an incoming
POTS call cannot restore an IP connection. The backup connection must be an IP connection for an automatic
restoration to take place.
NOTE: Only IP connections can be designated as primary connections. Both IP and POTS connections can be
backups.
Содержание Access NX
Страница 1: ...Product Manual ...
Страница 37: ...37 AUDIO INputs Settings with mixer Audio Output Settings with mixer ...
