30
IX.
NEtwork MANAgEr
On the left side of the
Network Manager
screen, NX presents a list of all network adapters (4G, Wi-Fi etc) that have been
attached to NX, along with the internal Ethernet port.
Note that with the CrossLock feature, it’s possible to have multiple active networks simultaneously.
One important element of the
Network Manager
is the concept of
Locations
. A
Location
contains the settings specific to
that network adapter for use on a specific network. Examples are use of the Ethernet port on a range of networks, some
using DHCP and some using static settings. Using
Locations
, each of these can be stored away separately and recalled
when needed.
Locations
are especially useful on Wi-Fi, since the security parameters of wireless networks can be stored
for subsequent use.
Each network starts off with a “
default
”
Location
, which can be edited by the user. Some networks don’t change config
parameters (e.g. 3G/4G, POTS) so a single default
Location
is all that’s required.
Networks fall into four distinct classes: Ethernet, Wi-Fi, 3G/4G and POTS modem. Each is discussed in greater detail next.
EthErNEt
Selecting the built-in Ethernet port shows the current status of the network
The Ethernet port can be disabled/enabled here and configured for multiple
Locations
from this screen. The internal
Ethernet port cannot be deleted.
Содержание Access NX
Страница 1: ...Product Manual ...
Страница 37: ...37 AUDIO INputs Settings with mixer Audio Output Settings with mixer ...
