Computherm Q8RF(TX), Руководство по эксплуатации

Страница: 17 / 17

A BRIEF DESCRIPTION OF PROGRAMMING
• Setting the date and time: press the “ DAY ” button, then adjust values using the
“ DAY ”,
and buttons.
•
Programming:
press and hold down the “
SET
” button, while pressing the
“ PROG ” button too, then adjust values with the “ PROG ”, and
buttons; use the “ COPY ” button to copy repeated programmes.
• Program inspection: using the “ PROG ”, and buttons.
• Retuning: using the " 1 ", " 2 ", " 3 ", " 4 ", " SET ", " DAY " and " COPY " buttons (see
Section 9.2).
• Transmission distance control: press the “ TEST ” button for more than 2
seconds.
• Temporary modification of the temperature set in the program:
• until the next switch in the program : set the temperature using the
and
buttons.
• for a period of 1 to 9 hours : set the temperature using the
and
buttons, then press the “ DAY ” button, and finally set the duration using the
and buttons.
• for a period of 1 to 99 days : set the temperature using the
and
buttons, then press the “ HOLD ” button and hold it down for 2 seconds, and
finally set the duration using the
and buttons.
• until the next interference
: set the temperature using the
and
buttons, then press the “ HOLD ” button briefly.
- 1
7
-
For better reading download this Operating
Instruction from our website!
Importer:
Thermostats4U
Email:
sales@thermostats4u.co.uk
For additional information visit:
thermostats4U.co.uk
The
COMPUTHERM
Q8RF(TX)
type thermostat complies
with the requirements of standards EU EMC 2004/108/EC;
LVD 2006/95/EC; and R&TTE 1999/5/EC