factory value of the button. For example, if the current switch
PROG
ensures
a temperature of
°C, it can be modified to a standard temperature that
ensures °C when needed by pressing the
button only once, without
having to press the
button several times in increments of 0.5°C. Following
this, using the large
and
buttons, the temperature can be further
modified in increments of 0.5°C, in accordance with current requirements.
The economy and comfort temperature values assigned to buttons
and
can be modified as follows:
•
To set the economy temperature
, press the “
SET
” button and keep it
depressed and press the
button, too. Following this, with the help
of the
and
buttons, set the economy temperature selected
by you. After the temperature has been set, press the “
SET
” button to
save the modification (after approximately 15 seconds, it is automatically
saved). Afterwards, the device goes back to the main screen.
•
To set the comfort temperature
, press the “
SET
” button and keep it
depressed and press the
button, too. Following this, with the help of
the
and
buttons, set the comfort temperature selected by you.
After the temperature has been set, press the “
SET
” button to save the
modification (after approximately 15 seconds, it is automatically saved).
Afterwards, the device goes back to the main screen.
4.1 Temperature modification until the next program switch
Set the required temperature using the large
and
buttons on the
front panel of the device. At this time, the
icon appears on the display,
indicating that the thermostat is operated with manual control. The device
will control the boiler according to the set value until the time of the next
switch specified in the program is reached.
During this temporary modification, the segments indicating the time on the
display alternately show the exact time
(
TIME
)
and the time remaining
(
TIME
LEFT
)
in manual control (for example
, that is, 4 hours and 2 minutes).
After this time has elapsed, the
icon disappears and the device resumes
the program that has been set. If you wish to return to the set program
before the time of the next switch is reached, please press the “
SET
” button.
4.2 Temperature modification for 1-9 hours (party program)
Set the required temperature using the large
and
buttons on the
front panel of the device, and then press the “
DAY
” button. At this time, the
icon appears on the display, along with number 1 in place of the switch
number, which indicates the duration of modification in hours. Adjust this time
to the desired length (between
and ) using the large
and
buttons.
The party program will start approximately 10 seconds after the adjustment.
Following this, the device will keep the modified temperature for the given
period of time. The adjusted temperature can be freely changed during the
party program without exiting it.
During this temporary modification, the segments indicating the time on the
- 12 -
