Computer Weld Technology Micro ADM, Руководство по эксплуатации и установке

Страница: 18 / 58

5.0 Micro ADM™ ASCII TERMINAL MODE PROTOCOL
5.1 General Description
If the Device ID is set to zero when the power is applied then the Micro ADM

Terminal mode is active and can be used to off-line program the user
configurable parameters and operating modes. The protocol is a simple ASCII
command string that allows the user to upload or download the various data.
The user can use any terminal program to perform the programming function. All
program command functions are case sensitive. The serial port is configured for
the following data format:

Baud Rate: 19.2K, Full Duplex

Word Length: 8 Data Bits, One Stop and no parity

Hand Shaking: None
5.2 TERMINAL PROTOCOL
The protocol consists of a command string and optional data bytes. The
command string is an alpha character and an option number followed by a "=" or
"?", followed by optional data and terminated with an ASCII "cr" (0dh). The "="
will indicate that data is being sent to the selected parameter by the host
controller. The "?" will indicate a request for data from the Micro ADM

to the
host controller. If the host is sending data to the Micro ADM

the data will be
placed after the "=" character and will be an ASCII string terminated with an
ASCII "cr" (0dh). The following is an example of reading a parameter value from
the Micro ADM™:
From Host type: V1? (cr)
Response from Micro ADM™: ##
Where: ## is the current value for the parameter and
(cr) is the enter key
The following is an example of how to modify a value in the Micro ADM™ using
the terminal commands:
From Host type: V1=#### (cr)
Where: ## is the new value for the parameter and
(cr) is the enter key
14