Compaq Confidential – Need to Know Required
Writer: Shared Engineering Services Project: Compaq Professional Workstation XP1000 Comments:
Part Number: EK-CPWXP-S1.B01 File Name: d-ch3 Troubleshooting.doc Last Saved On: 5/28/99 2:47 PM
Chapter
3
Troubleshooting
This chapter describes guidelines for battery replacement, ISA restrictions, and
initial as well as some detailed troubleshooting for your Compaq Professional
Workstation XP1000.
IMPORTANT:
Refer to the documentation supplied with additional options if you
experience problems with specific options that you have installed.
Battery Guidelines
When replacing batteries in this system, use only batteries that are compatible
with the product’s electrical requirements and recharging circuitry, if
applicable. Consult your local Compaq Service Center for information and
proper servicing.
WARNING:
Lithium batteries are subject to special precautions. There is a
danger of explosion if the battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
Recycle or dispose of batteries contained in this product properly, in
accordance with local regulations for the battery type, as marked on the
battery. Prior to disposal or recycling, protect batteries against accidental
short-circuiting by affixing nonconductive tape across the battery terminals or
conductive surfaces.
If the battery is not marked, or if you require further information, consult your
nearest Compaq Service Center.
