1-2
Compaq Professional Workstation XP1000 Installation and Setup Guide
Compaq Confidential – Need to Know Required
Writer: Steve Russell Project: Compaq Professional Workstation XP1000 Installation and Setup Guide Comments:
Part Number: EK-CPWXP-S1.B01 File Name: b-ch1 Getting Started.doc Last Saved On: 5/28/99 10:39 AM
Before You Begin
Initial System Inventory
Check to be sure you received the following components with your system,
and note the items in a safe place for later reference:
Monitor
System box
Mouse
Video cable
Power cords
Microphone
Keyboard
Headphones
Your system may include different components from those listed. Consult the
shipping list for an accurate listing of parts. If you think something is missing,
contact your distributor or Compaq Computer Corporation representative.
Pre-Startup Checklist
Before you start your system, perform the following checks:
■
Review the information supplied with your system, including user
documentation.
■
Select a well-ventilated site for your system near a grounded power
outlet and away from sources of excessive heat. The site also should be
isolated from electric noise (for example, spikes, sags, and surges)
produced by devices such as air conditioners, large fans, radios, and
televisions.
■
Save all shipping containers and packing material for repackaging or
moving the system later.
Precautions
NOTE:
Do not install optional hardware or application software until you have started your system and
verified that the base system is working correctly.
CAUTION:
Do not move your Professional Workstation XP1000 with removable media (for
example, CD disk in the drives. This may cause damage to the media and/or the drives.
WARNING:
When unpacking and moving system components, be aware that some
components (such as the monitor) may be too heavy for you to lift alone safely. If
you are doubtful about whether you can lift these items alone, please get assistance
