Compaq Deskpro 2000 Series, Руководство по обслуживанию и ремонту

Страница: 57 / 285

Compaq Deskpro 2000 2-15
2.4 Diagnostic Error Codes
Diagnostic error codes occur if the system recognizes a problem while running the Compaq Diagnostics
program. These error codes help identify possible defective subassemblies.
Tables 2-2 through 2-15 list possible error codes, descriptions of each error condition, and actions
required to resolve the error condition.
✎
Retest the system after completing each step. If the problem has been resolved, do not proceed with
the remaining steps.
For assistance in the removal and replacement of a particular subassembly, see Chapter 5, "Removal
and Replacement Procedures."
Table 2-2
Microprocessor Test Error Codes
Error
Code
Description Recommended Action
101-xx CPU test failed. Replace the system board and retest.
102-xx Coprocessor error.
1. Run Computer Setup and retest.
2. Replace the processor and retest.
103-xx DMA controller failed. Replace the system board and retest.
104-xx Interrupt controller failed. Replace the system board and retest.
105-xx Port 61 error. Replace the system board and retest.
106-xx Keyboard controller self-test failed. Replace the system board and retest.
107-xx CMOS RAM test failed. Replace the system board and retest.
108-xx CMOS interrupt test failed.
Replace the system board and retest.
109-xx CMOS clock test failed.
Replace the system board and retest.
110-xx Programmable timer test failed. The following step applies to error codes 110-xx through 113-01:
113-01 Protected mode test failed. Replace the system board and retest.
114-01 Speaker test failed.
1. Verify the speaker connection.
2. Replace the system board and retest.