manualshive.com logo in svg

Compaq Deskpro 2000 Series, Руководство по обслуживанию и ремонту

Поделиться
Скачать
Compaq Deskpro 2000 Series Скачать руководство пользователя страница 42

1-30

Product Description

1.7.8

PD-CD Drive

The PD-CD Drive is a "two drives in one" device in that it is a rewritable optical drive and a CD-ROM
drive. It is a 5.25-inch, half-height, tray-load device that uses phase-change dual technology to
simultaneously erase and write on the media at 2X speed and reads at 4X speed. The interface is
internal SCSI.

1.7.9

Modems

The Compaq internal 28.8 Data/Fax modem is available from Compaq for the Compaq Deskpro 2000
Series of Desktop Personal Computers. This modem is available in the U.S. only.

1.7.10 Software Options

The following software options are available from Compaq for the Compaq Deskpro 2000 Series of
Personal Computers:

■

MS-DOS 6 (3.5-inch diskettes)

■

Corporate license agreements for MS-DOS 6

■

MS-DOS 6 LicensePaq

■

MS-DOS 6 corporate upgrade (100+ users)

■

MS-DOS 6 LicensePaq upgrade

■

Netware, version 3.12 (dependent on number of users)

■

Netware, version 3.12 (CD-ROM, dependent on number of users)

■

Netware, version 4.0 (dependent on number of users)

■

Compaq EDGE for Netware

■

Netware management agents

■

Netware services manager

■

SCO UNIX O/S from Compaq version 4.1 (with media kit)

■

SCO UNIX network bundle from Compaq version 4.1 (with media kit)

■

SCO UNIX and TCP/IP Development System from Compaq release 1.2

■

SCO XSight Runtime version 4.1

■

Open Server Ethernet System, SCO 2.0

■

Open Server Network System, release 3.0

■

Open Desktop Development System, release 3.0

■

Windows NT Support for Windows NT is optimized on the Pentium 51xx series

Содержание Deskpro 2000 Series






























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды