manualshive.com logo in svg

Compaq Deskpro 2000 Series, Руководство по обслуживанию и ремонту

Поделиться
Скачать
Compaq Deskpro 2000 Series Скачать руководство пользователя страница 263

Compaq Deskpro 2000

7-19

7.6.3

Compaq Insight Personal Edition

Compaq Insight Personal Edition:

■

Enables viewing of AssetControl information locally.

■

Automatically displays a pre-failure warning message upon detecting a hard drive
or system temperature fault.

■

Enables viewing of hardware and software configuration information.

To run Compaq Insight Personal Edition:

  1.  Go to the Control Panel.

  2.  Double-click the Compaq Insight Personal Edition icon.

7.6.4

Compaq Insight Manager

Insight Manager is the Compaq application for easily managing servers and personal computers on a
network. Insight Manager delivers intelligent monitoring and alerting, remote maintenance, and visual
control of network resources.

Compaq Insight Management Agents for Microsoft Windows 95 operates on Deskpro personal
computers, monitoring the health of the system and generating alert notifications for the system
administrator if a fault is detected.

7.6.5

Changing the Default Configuration

To change the default configuration settings, run the Configuration utility. Refer to Chapter 2,
"Troubleshooting," for more information.

Содержание Deskpro 2000 Series






























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды