manualshive.com logo in svg

Compaq Deskpro 2000 Series, Руководство по обслуживанию и ремонту

Поделиться
Скачать
Compaq Deskpro 2000 Series Скачать руководство пользователя страница 150

Compaq Deskpro 2000    

5-37

5.1.16 Compaq Logo

The Compaq logo is secured to the front bezel with adhesive. If the original logo is still installed and it
is necessary to replace it, complete the following steps:

  1.  Remove the system unit cover as described in Section 5.1.6.

  2.  Remove the front bezel (Section 5.1.15.1).

  3.  From the inside of the front bezel, use a small screwdriver at the hole shown in the figure to push the

logo out of the front bezel.

  4.  Use a clean cloth to clean the recessed area in the front bezel where the logo is to be installed.

5. Remove the protective cover from the back of the replacement logo and press it into place.

Figure 5-32.

  Installing the Compaq Logo

If the original logo is missing, complete steps four and five to replace the logo without removing the
unit cover assembly.

Содержание Deskpro 2000 Series






























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды