manualshive.com logo in svg

Compaq Deskpro 2000 Series, Руководство по обслуживанию и ремонту

Поделиться
Скачать
Compaq Deskpro 2000 Series Скачать руководство пользователя страница 3

Notice

The information in this guide is subject to change without notice.

COMPAQ COMPUTER CORPORATION SHALL NOT BE LIABLE FOR
TECHNICAL OR EDITORIAL ERRORS OR OMISSIONS CONTAINED HEREIN;
NOR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL.

This guide contains information protected by copyright. No part of this guide may be
photocopied or reproduced in any form without prior written consent from Compaq
Computer Corporation.

 1996 Compaq Computer Corporation.

All rights reserved. Printed in the U.S.A.

Compaq, Deskpro
Registered U. S. Patent and Trademark Office.

Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation.

The software described in this guide is furnished under a license agreement or
nondisclosure agreement. The software may be used or copied only in accordance with
the terms of the agreement.

Product names mentioned herein may be trademarks and/or registered trademarks of their
respective companies.

Maintenance & Service Guide

Compaq Deskpro 2000 Series of Personal Computers

First Edition (September 1996)
Part Number 243064-001
Spare Part Number 243211-001

Compaq Computer Corporation

Содержание Deskpro 2000 Series






























































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды