Compaq 6400R - ProLiant - 1 GB RAM, Руководство по установке и настройке

Страница: 75 / 142

3-22 Compaq ProLiant 6400R Setup and Installation Guide
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: d-ch03 Installing Hardware Options Last Saved On: 3/20/00 12:17 PM
6. Place the same type of PCI expansion board into the same expansion
slot, pushing firmly until securely seated .
2
1
Figure 3-20. Installing a PCI expansion board
7. Close the expansion slot release lever from the rear of the unit to secure
the board. Make sure that the lever latches into the closed position .
8. Connect the expansion board I/O cable as appropriate.
9. When installing an internal PCI card cable, leave enough slack in the
cable to allow additional PCI cards to be removed without disconnecting
them.
10. Activate power to the slot through the PCI Hot Plug software
application or by pressing the PCI Hot Plug button with the
corresponding I/O expansion slot.
11. Verify the slot status by checking the green LED and amber LED .
The green LED flashes during the power up transition and turns on
when the power up is complete. See Table 5-1, “PCI Hot Plug LED Slot
Status,” in Chapter 5, “PCI Hot Plug Technology.”
12. Close and lock the PCI Hot Plug access door.
13. To reconfigure the server, see Chapter 7, “Server Configuration and
Utilities.”