Compaq 6400R - ProLiant - 1 GB RAM, Руководство по установке и настройке

Страница: 43 / 142

Rack-Mountable Server Installation 2-15
Compaq Confidential – Need to Know Required
Writer: Gilbert Saldivar Project: Compaq ProLiant 6400R Setup and Installation Guide Comments:
Part Number: 388776-002 File Name: c-ch02 Rack-Mountable Server Installation Last Saved On: 3/17/00 1:41 PM
Figure 2-5. Marking the rack with the template
4. After marking the front of the rack, flip the template over, and mark the
back rails of the rack. Open the rear door of the rack to access the back
rails.
5. On the back of the rack, also mark the rail to show the top of the
template. Marking helps you align the template for the next component.
Inserting Cage Nuts into the Rack Frame
After marking the positions for the fasteners on both the front and back of the
rack, use the fitting tool to insert cage nuts on the inside of the rails at the
marked locations. The cage nuts and fitting tool are included in the hardware
kit supplied with the rack.
1. Position the cage nut on the inside of the rail as shown in Figure 2-6.
2. Hook one of the lips of the cage nut through the square rail perforation.
3. Insert the tip of the fitting tool through the other side of the perforation,
and hook the opposite lip of the cage nut.