5.
Mechan
ica
l Installati
on
Mechanical Installation
Prior to Installation
Read the relevant parts of this manual and make sure you have the following information:
▪
All necessary approvals to work on the site
▪
The OPT factory set up sheet
▪
The site audit document
▪
The telephone number, user name and password for ADSL sites
▪
Contact details for site owner or manager
▪
Contact details for help desk
NOTE:
For ADSL sites, check that either the broadband account is set up.
NOTE:
For wireless sites check that the SIM card is registered to a valid account.
NOTE:
It is advisable to book an installation time with the help desk at least 24 hours before
going to site. This will ensure that help desk staff will be prepared for your inquiries. Help
desk hours are currently Monday to Friday 7.30am to 7pm NZ Standard Time.
Bring the following equipment:
▪
Mechanical and electrical tools
▪
Multimeter
▪
Fastenings to mount the OPT
▪
Security key drivers (Security TORX or unique security key if Extra Security equipped)
▪
A fully charged laptop computer
▪
A charged cell phone
▪
OPT spares kit
▪
SIM cards for wireless sites (if not supplied with unit)
Position
Refer to the Site Audit document for location.
Check the site drawings for details regarding hazardous areas. If in any doubt about the
location, refer to the site manager.
Install the OPT in a sheltered position and if possible, facing away from prevailing wind and
rain direction.
If possible, install out of direct sunlight to avoid raising the temperature inside the OPT
cabinet more than necessary.
Situate the OPT so the PIN pad display will not be in direct sunlight at any time during the
day as it makes it hard to read.
Make sure that you position the OPT to ensure you can open the cabinet door. If mounted
on a post, you must also allow clearance be able to remove and replace the access panel
on the post.
