G:\Masters\Installation Sheets\AdBlue\AdBlue Laser Installation Sheet.doc
Page 5 of 23
6.
Installation
Installation should be in accordance with local regulations.
The dispensing equipment shall be installed to prevent the delivery hose from contacting the
ground when not in use.
Dispensers should be mounted on a solid, level surface and secured using the fastening holes as
shown in the footprint drawings. It is up to the installer to select appropriate fastenings for the
application.
Where local regulations for flammable substances require a sump to be fitted:
a.
Sumps must be provided at all dispenser installations with secondary containment pipework
and at all new installations; and
b.
at all sites with sumps, dispensers should be installed with a liquid level detection device
fitted in the sump that will raise an alarm if liquid is detected in the base of the sump.
AdBlue is corrosive to aluminium and mild steel. All pipework and fittings that carry AdBlue must
be approved for use with it.
While AdBlue is considered non-toxic, it is slightly alkaline. Protect skin and eyes from contact.
Flush with water if exposed. Refer to the AdBlue MSDS for further information.
