G:\Masters\Installation Sheets\AdBlue\AdBlue Laser Installation Sheet.doc
Page 17 of 23
14.4
K-Factor Switch Settings
K-Factor, and other various configuration settings, are set via this switch. The position of the K-
Factor switch is shown in the diagram below:
Connections for Single and Duo dispensers
J1: Comms Test
J7: Displays
J13: Not used
J2: To Power Supply
J8: Not used
J14: Not used
J3: Input from meter side A
J9: Power for meters
J15: Not used
J4: Input from meter side B
J10: Totes
J16: Not used
J5: Not used
J11: Buzzer
J17: Backlighting
J6: Not used
J12: Nozzle Switches
Connections for Quad dispensers
J1: Comms Test
J7: Displays
J13: Not used
J2: To Power Supply
J8: Not used
J14: Not used
J3: Input from meter A1
J9: Power for meters
J15: Not used
J4: Input from meter A2
J10: Totes
J16: Not used
J5: Input from meter B1
J11: Buzzer
J17: Backlighting
J6: Input from meter B2
J12: Nozzle Switches
Parameter
Switch
K Factor
Switch
Parameter
Switch
K factor
Switch
