comoc C130 D 2015, Руководство по эксплуатации и обслуживанию

Страница: 39 / 48

ADJUSTING THE SCRUBBING BRUSH HEAD SPLASH GUARD RUBBER
Careful cleaning of the side splash guard rubbers of the scrubbing brush head guarantees better
cleaning of the floor.
To replace the splash guard rubber of the scrubbing brush head, proceed as follows:
1. Select the i-drive program “transport” by rotating the knob to position “A” as shown in ( Fig.1 ).
N.B. : by rotating the i-drive selector to the transfer program, all the brush heads and the squeegee
body will move to their idle positions (raised off floor).
N.B. : on the screen of the command display, the machine silhouette will have a green icon only
the symbol that identifies the traction motor .
2. Take the machine to the maintenance area.
NOTE
: the place designated for this operation must comply with current environmental protection
regulations.
3. Shift the direction lever (1) to “idle”, moving it in the direction shown by the arrow ( Fig.2 ).
N.B. : to select idle (N) move the lever in the direction shown by the arrow ( Fig.2 ).
N.B. : the letter “N” will appear on the command display indicating that no gear is engaged.
4. Engage the parking brake by moving the parking brake lever (2), beside the operator's seat, in the
direction shown by the arrow ( Fig.3 ).
N.B. : the symbol regarding the parking brake being engaged will appear on the command
display.
5. Select the i-drive program “scrubbing with drying” by rotating the knob to position “C” as shown in
( Fig.1 ).
ADJUSTMENT INTERVENTIONS
N.B. : rotating the i-drive selector to the scrubbing with drying program, all the brush heads and
squeegee body will move to their working positions (in contact with the floor).
6. Press the drive pedal (3) to move both the squeegee body and the brush head bodies to their
working positions ( Fig.4 ).
N.B. : on the screen of the command display, the machine silhouette will have a green icon:
the symbol that identifies the traction motor; the symbols that identify the motors of the
scrubbing brush head; the symbols that identify the motor of the sweeping brush head; the
symbols that identify the vacuum motors.
7. As soon as the brush head and splash guard bars are in the working position, make sure the
machine is in a safe condition (read “ MACHINE SAFETY ”).
CAUTION : these operations must be carried out using protective gloves to avoid any possible
contact with the edges or tips of metal objects.
8. Stand on the right side of the machine.
9. Using a suitable tool loosen the screws (4) that fix the scrubbing brush head splash guard support (5)
to the scrubbing brush head body (
Fig.5
).
N.B.
: the equipment to be used for this operation is not supplied with the machine.
10. Move up or down ( Fig.6 ) the scrubbing brush head splash guard support until the splash guard
rubber is evenly folded outwards along its length by about 30°- 45° with respect to the floor
( Fig.7 ).
11. As soon as the adjustment of the splash guard rubber is finished, using suitable equipment
tighten the screws (4) that fix the scrubbing brush head splash guard support (5) to the scrubbing
brush head body ( Fig.8 ).
N.B.
: the equipment to be used for this operation is not supplied with the machine.
12. Repeat steps 9 - 11 also for the left-hand side of the machine.
ADJUSTING THE SQUEEGEE SPLASH GUARD BAR RUBBER
Careful cleaning of the splash guard rubber of the squeegee body guarantees better cleaning of the floor.
To adjust the squeegee lateral splash guard rubber, proceed as follows:
1. Select the i-drive program “transport” by rotating the knob to position “A” as shown in ( Fig.1 ).
N.B. : by rotating the i-drive selector to the transfer program, all the brush heads and the squeegee
body will move to their idle positions (raised off floor).
N.B. : on the screen of the command display, the machine silhouette will have a green icon only
the symbol that identifies the traction motor .
2. Take the machine to the maintenance area.
NOTE : the place designated for this operation must comply with current environmental protection
regulations.
3. Shift the direction lever (1) to “idle”, moving it in the direction shown by the arrow ( Fig.2 ).
N.B. : to select idle (N) move the lever in the direction shown by the arrow ( Fig.2 ).
N.B. : the letter “N” will appear on the command display indicating that no gear is engaged.
4. Engage the parking brake by moving the parking brake lever (2), beside the operator's seat, in the
direction shown by the arrow ( Fig.3 ).
N.B. : the symbol regarding the parking brake being engaged will appear on the command
display.
5. Select the i-drive program “scrubbing with drying” by rotating the knob to position “C” as shown in
(
Fig.1
).
N.B. : rotating the i-drive selector to the scrubbing with drying program, all the brush heads and
squeegee body will move to their working positions (in contact with the floor).
6. Press the drive pedal (3) to move both the squeegee body and the brush head bodies to their
working positions ( Fig.4 ).
N.B. : on the screen of the command display, the machine silhouette will have a green icon:
the symbol that identifies the traction motor; the symbols that identify the motors of the
scrubbing brush head; the symbols that identify the motor of the sweeping brush head; the
symbols that identify the vacuum motors.
7. As soon as the brush head and splash guard bars are in the working position, make sure the
machine is in a safe condition (read “ MACHINE SAFETY ”).
CAUTION : these operations must be carried out using protective gloves to avoid any possible
contact with the edges or tips of metal objects.
8. Stand on the right side of the machine.
9. Using the specific tool loosen the nut (4) locking the adjustment pin (5) to the splash guard bar body
(6) ( Fig.5 ).
N.B. : the equipment to be used for this operation is not supplied with the machine.
10. To adjust the front part of the splash guard rubber, turn the adjustment pin (5) until the splash
guard rubber is evenly folded outwards along the entire length by about 30°- 45° with respect to
the floor ( Fig.6 ).
11. Remove the retainer (7) from the pin (8) in the squeegee body ( Fig.7 ).
12. Free the pin (8) in the squeegee body from the slot (9) in the squeegee control bar ( Fig.8 ).
13. To adjust the rear part of the splash guard rubber, using the specific tool screw in or unscrew the
nut (10) until the splash guard rubber is evenly folded outwards along the entire length by about
30°- 45° with respect to the floor ( Fig.9 ).
N.B. : the equipment to be used for this operation is not supplied with the machine.
N.B. : to check that the rear part of the splash guard rubber has been adjusted correctly
you need to reposition the splash guard bar body above the squeegee body.
14. Repeat steps 9 - 13 also for the left-hand side of the machine.
39
1
2
A
C
1
4
3
2
3
6
7
5
8
4
4
5
5
1 2
A
C
1
4
3
2
3
5 6
4
5
6