7.
Select the direction in which you want to move the machine. For example, if you want to move
forwards shift the direction selector lever (29) in the direction shown by the arrow (
Fig.4
).
N.B.
: To select the forward gear (F) you need to first shift the lever up and then shift it in the
direction indicated by the arrow (
Fig.4
).
N.B.
: the letter “F” will appear on the command display indicating that the forward gear is
engaged (6).
N.B.
: on the command display, near the letter “F” the number “1” is displayed indicating that
the forward speed engaged is “step-01” (6).
8.
Release the parking brake by moving the parking brake lever (30), beside the operator's seat, in
the direction shown by the arrow (
Fig.5
).
N.B.
: the symbol regarding the parking brake being engaged will appear on the command
display (6).
9.
Press the drive pedal (31) to begin moving the machine (
Fig.6
).
If, when working, it is necessary to use the dipped-beam headlights, press the button (9) on the
command display.
N.B.
: setting the main switch to “I” the sidelights will come on, and on the instrument panel the
relative symbol will come on (2)
N.B.
: To access the dipped-beam headlights, press the button (23) on the instrument panel.
N.B.
: The low beam headlights are active when the symbol (23) on the instrument panel is green,
the relative symbol (4) on the command display comes on.
If, when working, the general alarm indicator light (3) comes on, stop the machine and contact the
nearest service centre.
If, when working, the braking system low oil level indicator light (5) comes on, stop the machine and
contact the nearest service centre.
WORKING PROGRAM: DRYING
Selecting the program “DRYING”, the control display screen will appear as shown in the figure.
All the brush heads are raised off the floor and do not operate, while the squeegee body is in the work
position and both vacuum motors are running.
The drying without scrubbing operation should only be
carried out if the device was used beforehand to
carry out a scrubbing without drying operation.
The icons visible in the drying program are:
1. Machine silhouette, where the icon regarding the traction motor and the icons regarding the vacuum
motors are green.
N.B.
: the grey symbols identify the components that are not active. the green symbols identify the
components that are active. the red symbols identify the components that are faulty.
2. Indicator light indicating the side lights are active (green).
3. Indicator light indicating the low beam lights are active (green).
4. Indicator light indicating the general alarm (red).
5. Indicator light indicating the braking system oil is low (red).
6. Indicator light indicating the parking brake is engaged (red).
7. Indicator light indicating the recovery tank is full (light blue).
8. “Noise reduction“ button, allows you to reduce the noise of the vacuum motors.
N.B.
: the white symbol (8) identifies the standard operation of the vacuum motors. the green
symbol (8) identifies the eco operation of the vacuum motors.
To use the drying program, proceed as follows:
1. Sit on the driver’s seat.
2. Turn on the machine (
Fig.1
).
3.
The first screen shown displays the manufacturer's logo and the name of the machine.
4. The second screen shown displays the working screen.
5.
Select the “transfer” program with the knob of the I-Drive device (26) (
Fig.2
).
6.
Select the speed level (for example “step-01”), turn the knob (27) on the direction selection lever
(28) (
Fig.3
), under the steering wheel.
N.B.
: adjust the forward speed to suit the adhesion conditions.
7.
Select forward movement by shifting the direction lever (29) in the direction shown by the arrow
(
Fig.4
).
N.B.
: to select the forward gear (F) you need to first shift the lever up and then shift it in the
direction indicated by the arrow (
Fig.4
).
N.B.
: the letter “F” will appear on the command display indicating that the forward gear is
engaged (19).
N.B.
: on the command display, near the letter “F” the number “1” is displayed indicating that
the forward speed engaged is “step-01” (19).
8.
Release the parking brake by moving the parking brake lever (30), beside the operator's seat, in
the direction shown by the arrow (
Fig.5
).
N.B.
: the symbol regarding the parking brake being engaged will appear on the command
display (6).
9.
Pressing the drive pedal (31) (
Fig.6
), starts the machine moving and the squeegee will go to the
work position. As soon as the squeegee body is in the working position the two vacuum motors
will start operating.
If during the “DRYING” program the machine is stopped and the drive pedal is released, the squeegee
body will remain in contact with the floor for a few seconds, after which it will raise up from the ground
to go back to its rest position.
In all these phases, the vacuum motors continue to operate, only a few seconds after they return to
the rest position do they switch off, this is to allow the motor to collect all the liquid in the vacuum hose.
During these phases, the vacuum motor symbol (1) on the command display will be green, it will become
grey when the vacuum motor switches off.
N.B.:
by pressing the forward movement pedal it will start working with the same program and with
the same parameters that were set before it stopped.
N.B.
: the symbol (8) is visible on the command display only when the vacuum motors are running.
12. Machine's draw level bar.
14. Check button, allows you to display the screen regarding the working condition of the machine.
N.B.
: To understand which parameters are displayed on the screen, read the section “
” in the “WORK” chapter.
15. Hour meter.
N.B.
: the value displayed represents
the total time the machine has been used.
19. Abbreviation identifying the machine's direction parameters (gear and speed).
N.B.
: the letter that precedes the number identifies the direction selected, to adjust the direction
read the section “
N.B.
: the number that follows the letter identifies the speed selected, to adjust the speed read the
”.
20. Setting button, allows you to make temporary changes to the machine parameters.
22. Battery charge level bar.
N.B.
: To understand the function of the battery charge level bar, read the section “
”.
23. Activating– deactivating dipped headlights button.
N.B.
: setting the main switch to “I” the sidelights will come on. To access the dipped-beam
headlights, press the button (23) on the instrument panel.
N.B.
: The low beam headlights are active when the symbol (2) on the instrument panel is green.
21
4
29
6
5
30
31
1
2
19
3
4
5
6
8
15
11
23
12
22
14
20
2
1
24
26
25
3
27
28
4
29
6
5
30
31