Comnet CNGE8MS, Инструкция по установке и эксплуатации

Страница: 89 / 96

inS_cnge8MS_reV–
09/17/12 Page 89
INSTALLATION AND OPERATION MANUAL CNGE8MS
Tech SupporT: 1.888.678.9427
Commands Set List—SYSLOG, SMTP, EVENT command set
CNGE8MS
Commands
Level Description Example
systemlog ip
[IP address] G Set System log server IP address. switch(config)# systemlog ip
192.168.1.100
systemlog mode
[client|server|both] G Specified the log mode switch(config)# systemlog
mode both
show systemlog E Display system log. Switch>show systemlog
show systemlog P Show system log client & server information switch#show systemlog
no systemlog G Disable systemlog functon switch(config)#no systemlog
smtp enable G Enable SMTP function switch(config)#smtp enable
smtp serverip
[IP address] G Configure SMTP server IP switch(config)#smtp serverip
192.168.1.5
smtp authentication G Enable SMTP authentication switch(config)#smtp
authentication
smtp account
[account] G Configure authentication account switch(config)#smtp account
User
smtp password
[password] G Configure authentication password switch(config)#smtp
password
smtp rcptemail
[Index] [Email
address] G Configure Rcpt e-mail Address switch(config)#smtp
rcptemail 1 Alert@test.com
show smtp P Show the information of SMTP switch#show smtp
no smtp G Disable SMTP function switch(config)#no smtp
event device-cold-
start
[Systemlog|
SMTP|Both] G Set cold start event type switch(config)#event device-
cold-start both
event authentication-
failure
[Systemlog|
SMTP|Both] G Set Authentication failure event type switch(config)#event
authentication-failure both
event Ring-topology-
change
[Systemlog|
SMTP|Both] G Set s ring topology changed event type switch(config)#event ring-
topology-change both
event systemlog
[Link-UP|Link-
Down|Both] I Set port event for system log switch(config)#interface
fastethernet 3
switch(config-if)#event
systemlog both