inS_cnge8MS_reV–
09/17/12 Page 75
INSTALLATION AND OPERATION MANUAL
CNGE8MS
Tech SupporT: 1.888.678.9427
Command Level
Modes
Access Method
Prompt
Exit Method
About This Model
User EXEC
Begin a session
with your switch.
switch>
Enter logout or
quit.
The user command available at
the level of user is the subset of
those available at the privileged
level.
Use this mode to
• Enter menu mode.
• Display system information.
Privileged EXEC Enter the enable
command while in
user EXEC mode.
switch#
Enter disable to
exit.
The privileged command is
advance mode
Privileged this mode to
• Display advance function status
• save configures
Global
configuration
Enter the
configure
command while in
privileged EXEC
mode.
switch(config)#
To exit to
privileged EXEC
mode, enter exit
or end
Use this mode to configure
parameters that apply to your
Switch as a whole.
VLAN database Enter the vlan
database
command while in
privileged EXEC
mode.
switch(vlan)#
To exit to user
EXEC mode,
enter exit.
Use this mode to configure
VLAN-specific parameters.
Interface
configuration
Enter the
interface
command (with a
specific interface)
while in global
configuration
mode
switch(config-if)# To exit to global
configuration
mode, enter exit.
To exit privileged
EXEC mode or
end.
Use this mode to configure
parameters for the switch and
Ethernet ports.
Symbol of Command Level.
Mode
Symbol of
Command Level
User EXEC
E
Privileged EXEC P
Global
configuration
G
VLAN database V
Interface
configuration
I
