inS_cnge8MS_reV–
09/17/12 Page 79
INSTALLATION AND OPERATION MANUAL
CNGE8MS
Tech SupporT: 1.888.678.9427
bandwidth in [Value]
I
Set interface input bandwidth. Rate Range is
from 100 kbps to 102400 kbps or to 256000
kbps for giga ports, and zero means no limit.
switch(config)#interface
fastEthernet 2
switch(config-if)#bandwidth
in 100
bandwidth out [Value]
Set interface output bandwidth. Rate Range is
from 100 kbps to 102400 kbps or to 256000
kbps for giga ports, and zero means no limit.
switch(config)#interface
fastEthernet 2
switch(config-if)#bandwidth
out 100
show bandwidth
I
Show interfaces bandwidth control
switch(config)#interface
fastEthernet 2
switch(config-if)#show
bandwidth
state
[Enable | Disable]
I
Use the state interface configuration
command to specify the state mode of
operation for Ethernet ports. Use the disable
form of this command to disable the port.
switch(config)#interface
fastEthernet 2
switch(config-if)#state
Disable
show interface
configuration
I
show interface configuration status
switch(config)#interface
fastEthernet 2
switch(config-if)#show
interface configuration
show interface status
I
show interface actual status
switch(config)#interface
fastEthernet 2
switch(config-if)#show
interface status
show interface
accounting
I
show interface statistic counter
switch(config)#interface
fastEthernet 2
switch(config-if)#show
interface accounting
no accounting
I
Clear interface accounting information
switch(config)#interface
fastEthernet 2
switch(config-if)#no
accounting
